Skip to content
GHOST HUNTING GEAR
Search our store.
Night Vision/Full Spectrum
FLIR Thermal Camera
Tripods and Mounts
Shirts and Hats
Team Shirt Printing
Seen on TV
Made by GhostStop
Ghost Hunting Teams
Ghost Hunts & Tours
UFO Hunting Equipment
TriField TF2 EMF Meter
160 Reward Tokens
Directions & Contents
TriField TF2 EMF Meter
New model with digital backlight display, sound alerts and wider ranges.
The new TriField TF2 EMF meter detects changes in a wide range of EMF energy changes including electric, magnetic and RF. This precision tool wears many hats for total control over the fields detected and sensitivity to suit the environment. It is so highly sensitive it will detect the presence of activity from your hand waving directly over the meter to energy changes across the room with selections to fit your needs.
Digital display with adjustable light for low-light viewing of crystal clear readings
Sound alerts indicate signal strength with changing tone to track sources
3-axis detection of AC magnetic, AC electric and RF/microwave in one device
Weighted selection to differentiate between man-made EMF and low-level changes such as those from humans or an entity
The TriField TF2 meter was designed for precision measurement with clear and accurate readings. As paranormal investigators, we require precision on minimal changes. TriField provides this as an AC electric field meter and radio power density meter in a single unit that combines all the features needed for fast, accurate measurements of electromagnetic fields (EMF). In addition to standard AC measurement modes, a special frequency weighted mode will properly scale the magnetic and electric measurements to indicate the full magnitude of currents produced by each type of field.
Detects all three types of EMF pollution: AC magnetic, AC electric, and RF/microwave
Special frequency weighting mode for measuring electric current from EMF in the human body
AC Magnetic Mode covers 40 Hz – 100 kHz with range of 0.1 – 100.0 milligauss (mG)
AC Electric Mode covers 40 Hz – 100 kHz with range of 1 – 1000 volts per meter (V/m)
RF Mode covers 20 MHz – 6 GHz with range of 0.001 – 19.999 milliwatts per square meter (mW/m2)
AC magnetic measurements are 3-axis, allowing for quick readings, regardless of meter orientation
Large liquid-crystal display (LCD) for crystal clear, accurate readings
Adjustable backlight for use in low-light environments
Audio Indicator emits sound that helps to pinpoint EMF sources
Peak Hold captures fast pulses, for measuring fast digital signals
Operates for more than 20 hours on a 9V battery, with a low battery indicator
Weight: 0.51 lbs
Dimensions: 1.5 × 2.75 × 5.25 in
1. Hold the meter in our palm gripping it on either side.
Note: Please do not cover the sensors at the top of the meter with your hand or other objects.
2. The knob is used to switch between measurement modes and to turn the meter off when not in use.
For measuring the effect of EMF on the human body (or any conductive body), use the dark blue Weighted modes.
For direct measurement of field strength, use the light blue Standard modes.
The red RF mode can be used for any radio or microwave measuring purpose.
4. The display shows the Field Measurement number and the units at the bottom of the screen. The Peak Measurement number is shown at the top left next to the peak icon.
5. To turn on the Audio Indicator, first remove the battery cover by sliding it downward. Press the audio button. Press the audio button again to turn the audio off.
6. To turn on the backlight, first remove the battery cover by sliding it downward. Press the backlight button until the desired brightness is reached.
7. When the battery life indicator at the top right shows only 1 bar remaining, it’s time to replace the battery. Remove the battery cover by sliding it downward and tap the battery compartment on the palm of your hand so the battery falls out.
Share your knowledge of this product with other customers...
Be the first to write a review
Seen on TV
Back to top