Rem-Pod EMT Programmable with Temperature Detection

All Rem-Pod features in one model. (Rem-Pod-EMT)

With an all new design, the REM Pod uses a mini telescopic antenna to radiate its own independent magnetic field around the instrument. This EM field can be easily influenced by materials and objects that conduct electricity. Based on source proximity, strength and EM field distortion (4) colorful LED lights can be activated in any order or combination. The Rem-Pod is intended to further help promote and advance Paranormal research.

New Features

• New design
• Proximity detection with range adjustment
• Temperature change alert (ATDD) with audible tones
• Sensitivity adjustment
• LED to indicate temperature changes (red for warmer, blue for cooler)
• Automatic or manual baseline correction
• Independent switches so you can use one function or both
• Programmable features

NEW FEATURE includes the EMT / ATDD (Ambient Temperature Deviation Detection) that detects and alerts you to ambient temperature changes with an audible tone. If the temperature drops, a lower tone is heard and if the temperature rises the tone is heard with a higher pitch alert. An LED light also indicates changes visually with color changes. Blue indicates temp drops while red indicates warmer changes. This is very helpful in detecting environmental changes without staring at the unit all night.

Note: This item was originally designed for the Ghost Adventures Team. They have had some very interesting results with the device which have been featured on the show several times.

We are an official distributor of the REM-Pod. Your product comes with support and is protected by manufacturer warranty.

• Easy to View Bright RED, GREEN, BLUE & Yellow Indication
• Audible Tones Correlating To Field Disturbance
• 5-Step Programmable REM Sensitivity allows Instantaneous Response To Field Fluctuations & Spikes
• Glow in the Dark Surface Allows Easy Visibility (Glows for 24 hrs.)
• 9Vdc Operation
• Instantaneous Response To Field Fluctuations & Spikes
• Toggle Switch ON/OFF
• Mini Telescopic Antenna provides 360 Degree Coverage
• New Amplified REM-Pod with 3X Sensitivity Increase
• Auto and Manual Temperature "Zero" (Baseline)
• Auto and Manual REM "Zero" (Baseline)
• Response Time: 100msec.

Directions

Programmagle Rem-Pod with Temperature Deviation Detection & REM Sensitivity

1. Remove the protective paper from the top of the REM-Pod, if still adhered to the unit.
2. Gently extend the telescopic antenna located at the top of the REM-POD-EMT.
3. Located on the bottom of the REM-POD-EMT you will find a slide switch that turns the REM function On or Off. In the REM setting, the REM with EM field around the antenna will be activated.
4. The ATDD Power button located on the bottom of the Pod allows for ± 1 to 5 degree Ambient Temperature Detection. PLEASE NOTE: To activate the Ambient Temperature Deviation Detection (ATDD) circuit, the REM circuit must also be powered On for the ATDD circuit to function. Once activated, the ATDD will do a diagnostic check and the circuit will baseline to the environment ambient temperature condition. The temperature sensor is located on the top of the REM-POD-EMT adjacent to the telescopic antenna. An LED on top of the Pod turns red with ascending tones for each “+” degree change and a blue LED turns on with descending tones for a “-“ temperature change.
5. Once the REM-POD-EMT is turned on, it goes through a quick self-test diagnostic routine. You can adjust the REM detection sensitivity level to suit your needs. The REM field and strength around the antenna is adjustable using the momentary REM RANGE button on top of the Pod. Each time the button is depressed, the detection range and sensitivity will increase by approximately 20%. When adjusting the sensitivity, the LEDs located on the top of the REM-POD-EMT will blink to acknowledge the range setting. Press the momentary switch to loop through the sensitivity range settings.
   
   Sensitivity Level # 1 = Purple LED
   Sensitivity Level # 2 = Purple & Red LEDs
   Sensitivity Level # 3 = Purple, Red & Blue LEDs
   Sensitivity Level # 4 = Purple, Red, Blue & Yellow LEDs
   Sensitivity Level # 5 = Purple, Red, Blue, Yellow & Green LEDs
   
   
6. To test the REM-POD-EMT detection range, approach the antenna (centered) from the left and right, using your left and right hands simultaneously. The maximum detection distance for a hand is around 5” or 6”.
7. The REM-POD-EMT has an Auto and Manual Baseline Calibration adjustment. The REM Auto Baseline occurs approximately every seven seconds. This is an important function because it will automatically adjust for any interference from metal, fluorescent lights, and other conductive surfaces. If you notice any interference from handheld communication devices like walkie talkies, adjust the sensitivity level accordingly, or refrain from using them during your investigation. Use the REM Zero button on top of the Pod to baseline the REM feature if you need to.
8. The temperature circuit also has an Auto and Manual Baseline adjustment. Make sure the REM-POD- EMT has at least ten minutes to adjust to the surrounding Ambient Temperature prior to use. If the temperature in the room rises or drops gradually and “sticks” on one degree (one tone), you can push the ATDD ZERO button located on the top of the Pod to correct for this. Or, if the sound remains on for more than ten seconds, the device will automatically mute the sound until it senses the next ± 1 degree temperature change.

PLEASE NOTE: Always be sure to use a fresh 9VDC alkaline battery during your investigation. When a battery needs to be changed, the REM-POD-EMT green LED will start to fluctuate randomly. Be sure to install the 9VDC battery correctly to prevent possible damage to the circuit.