Mel EMF Meter
Simultaneous EMF and Temperature Readout with Red Illuminated Display.
When you need to measure EMF and temperature, you need one hand operation that gives you a wealth of information, and lots of options.
This device offers both single axis AC Magnetic field measurement and real time air temperature readings. Display illumination is RED, so it doesn’t saturate your eyes when working in in dark areas. Readout in mG or µT, °F or °C. High resolution and fast response. Basic 1 inch K-Type thermocouple is included and it can be used with a variety of commercially available thermocouple probes for extended temperature ranges. Solves the age old paranormal equipment problem of "How do I hold all this stuff?"!
We are an official distributor of the Mel Meter. Your product comes with support and is protected by manufacturer warranty.
GhostStop Ghost Hunting Equipment Demo: Mel Meters
- EMF Bandwidth: 30-300 Hz
- 3 EMF Ranges: 200 mG (0.1 mG resolution), 2000 mG, 20,000 mG
- Temp: -40 to 482 °F (0.1° resolution)
- 9V battery powered (not included) or use an AC to 9V adapter for unlimited power (not included)
EMF Measurement 1) Power On the meter by pressing the " Power Button " once for 3 seconds. 2) With the tester in hand, move slowly towards to the object under measurement until it is physically touched. The upper Display will present the EMF measurement value. 3) Position the EMF tester at different angles to the object under measurement and observe how this may affect your reading. 4) By trying different angles approaching the object under measurement, record the highest value shown on the display. Temperature Measurement 1) Insert the " Temp. probe plug " into the " Temp. probe socket " 2) Power on the meter by pressing the " Power button " once for 3 seconds. 3) The lower right Display will show the temperature value sensing from the probe's head.
|